My latest pattern is now available for purchase! This is a potato chip scarf, with an extra touch - eyelets along the edges where the scarf ruffles. SORRY PATTERN NO LONGER AVAILABLE
This is knit with one skein of Patons Lace yarn on US Size 7 needles. I used the color Bonfire, but this will look great in any of the other colors.
All you need to know for this scarf is knit, purl, yarn over, and short rows. (There is no wrapping with these short rows, although you could if you want to) If you need help with any of these, I have videos on my YouTube channel that you can watch.
Flutter Scarf in Mongolian Cashmere, 2 Ply from Jade Sapphire. I used the color Candy Girl. - Free Pattern is below. Want more ruffles? Check out my Amazing Curly Scarf!
Potato Chip scarf, spiral scarf, ruffle scarf - whatever you call it, this scarf is girly and cute. The first time I saw this type of scarf was in a yarn shop in New Jersey a couple of years ago. I was looking at it, trying to figure out how it was done. The shop owner said it was done with short rows. I had only briefly played with short rows at that point, and wasn't really that sure how to knit something using short rows. I was afraid to ask, and too cheap to purchase the pattern. I have now sort of figured out short rows, and came up with this scarf.
There are many ways to make a potato chip scarf. Below I have some links so you can see some of the different methods - they are really all very similar and produce a scarf that looks like mine.
Knitting short rows creates wedges, which in turn creates the ruffles, or waves, or potato chips on the scarf. This scarf does spiral, but not quite as much as the Amazing Curly Scarf pattern I posted a while back. I did not wrap my stitches before turning, however you may do so if you like. You can find more info on short rows and wrapping and turning here if you don't know how.
For my scarf, I started out by knitting a small number of stitches, then worked up to a larger number before knitting all the way across to work the other side. I left one stitch up the middle which is only knit on the full row - it is left unworked as I knit the wedges on the sides. Some patterns use over lapping wedges, others do not have a middle, unworked stitch. Some start out working more stitches and then wind down to a fewer number before the full row. I recommend playing around and trying different methods to see what you like in whichever yarn you choose to use. Keep in mind that your ruffles will not appear right away - you will be a good several inches in on the scarf before you begin to see the ruffles. And, when you bind off, the scarf will shape itself to match the cast on edge. I like to refer to the edges as bows, because that's what they look like to me.
Sample was knit with Lily Sugar n Cream on US Size 6 needles - 4 stitches
I have been thinking about spiral/curly I-Cord for some time now. None of the info I found (like HERE) was what I was looking for. The curl was produced after the length of the cord had been knit - when I bind off, I like that to be the end! I am not too fond of binding off and still having something left to do (seaming, anyone?). You can even do a mini version of my Amazing Curly Scarf to make spirals - I believe this is the method in Knitting Over the Edge. But I didn't want that look either. So, this morning I got out some yarn and needles, and played around until I came up with this method. I am not saying I am the first to do it like this, because I am sure someone else out there has done this before me, but I didn't find any instructions for spiral I-Cord during my search that was like this.
It is very simple to do and I willingly admit that I am darn proud of myself for having an idea that actually works! So, without further ado, here is what I did. I am assuming that you already know how to make the standard I-Cord by the way.
Cast on 4 stitches - you can use either DPNs or a circular needle
Slide stitches to the other end of the needle as normal and knit all stitches
Row 2 - Knit 2, Slip 1, Knit 1
Row 3 - Knit 2, Slip 1, Knit 1
Row 4 - Knit all stitches
Repeat Row 2 - 4 until cord is the desired length
What to do with the curly I-Cord? Maybe replace the standard fringe on a scarf with these nifty spirals, or top off a hat. You can even add beads - I have a tutorial on that too. You are only limited by your imagination.
This is by no means the only way to knit a spiral cord. I encourage you to play around with different yarns and needle sizes, and even a different number of stitches. Perhaps add another row or two where the stitch is slipped - heck, slip two stitches. You may come up with a better curling cord. If you do alter this "pattern", I would love to see what you come up with!
Amazing Curly Scarf - free pattern below. Want less ruffles? Check out my Potato Chip Flutter Scarf!
I've knit a few spiral scarves over the years, and they remain one of my favorite knits. How cool is it that your fabric begins to spiral right before your eyes as you bind off? And the best part - it is so easy to do!
Also called a corkscrew or potato chip scarf, you can use just about any yarn and needle size you like. The secret, or trick, to making your scarf spiral is in the increase rows. That's it!
I do recommend using at least a 32 inch circular needle - you will start out with relatively few stitches and in the end will have hundreds, or even 1,000 stitches that need to fit comfortably on your needles.
All you have to do is cast on a certain number of stitches, let's say 100. Knit two or three rows; then you will do an increase row to double the number of stitches you started with. Simply knit into the front and back of each stitch (you could even make YOs if you don't like knitting into the front and back of your stitches) - so if you started with 100 stitches, after the increase row you will have 200. No need to count to make sure you have exactly double the number. A few more or less isn't going to make much of a difference.
Now, knit some more plain rows - however many you knit before, whether it be two or three. The most I have used between increase rows is three, so while I am sure you could do more, I can't vouch for the looks of the scarf in doing so or the effect this would have on the spiral.
Do another increase row, again doubling the number of stitches on your needles.
Continue in this manner until you have roughly 800-1,000 stitches. I say roughly, because the needle size and weight of yarn you use will affect how long your scarf ends up being. A word of warning though - do remember that as you increase the number of stitches, the length of your scarf will also increase. One of the first spiral scarves I knit ended up with close to 2,000 stitches, and was about 12 feet long. That is much too long for most folks!! Obviously, if you are using a lace weight yarn and small needles, you will need more stitches to get an appropriate length on your scarf; if you are using a larger needle and bulkier yarn, you won't need quite as many stitches.
When you are ready, bind off. I usually knit one row less than I knit between the increase rows, so for example if you were knitting two rows between increases, knit one row and then bind off. You can use any bind off you like. Ta-Da! You now have a spiral scarf. (Is this scarf too curly/ruffly for you? Maybe you will like the Flutter Scarf instead)
Below is a video in which I knit the above scarf. If you would like to knit the same, go here.
If you are new to knitting, you may be wondering how to knit a scarf. Scarves are good beginner projects, because you generally don't need to worry about gauge - something which often confuses newbies. Scarves can be knit as long as you want, as wide as you want, as skinny as you want. You can use any yarn you like, any needle size, and any stitch pattern. It can be simple, such as garter stitch, or something more complicated like lace.
Even though a scarf is a simple project, all of the options can be overwhelming. If you aren't ready to go it alone, there are more scarf patterns available on the web than you can shake a knitting needle at. If you would like to design your own, here are a few steps to get you started.
Find a stitch pattern you like. There are many web sites with stitch patterns if you don't own any stitch pattern books. The Weekly Stitch has a new stitch pattern posted each week, most with a video demonstration of the stitch.
Choose your yarn and needles. If you aren't sure of which needle to use for you yarn, check the ball band and start with the recommend size. While you don't have to swatch first, you certainly can if you like; you can decide from there if you like how the fabric looks, and if you'd like to make a denser fabric then try a needle size smaller than the one recommended. If you'd like something looser and airy, shoot for a larger needle size. Also, a swatch can tell you how wide your scarf will be. Myself, I just guesstimate and don't worry about it. Obviously, what type of yarn and needle size you use will affect the width. Finer yarn will require more stitches, and heavier weight yarn will require less.
Once you have your yarn, needles and stitch pattern you are ready to cast on.
Begin knitting your scarf; keep going until it is as long as you want it to be. Now you can cast off, or bind off. Use any bind off you like. The standard knit bind off will do fine, but of course there are many different bind offs. If you like to purl, you can try the standard purl bind off, or if you crochet perhaps the single crochet bind off will feel most comfortable for you.
If you have knit your scarf with wool or another animal fiber, you may want to block it before wearing it. Blocking is not required, but can open up your stitches and give the scarf a more finished look. You can always add fringe to your scarf if you like! Now you are ready to wear your new scarf!
Scarves are a good way to use up left over yarns; you can use several strands at once, or just knit with one until you run out and then begin with another. The scarf above was knit with four strands of yarn on large needles. I wanted to use up some scrap yarn, as well as get it done fast.
